Aluminum Foil Tape
Aluminum foil tape (HAVC tape) is made of aluminum foil and coated with glue. It has good adhesion, waterproof, high and low-temperature resistance, anti-aging, etc. So we also called our tape as waterproof aluminum foil tape/ high temperature foil tape. We have reinforced aluminum foil tape, fiberglass cloth aluminum foil tape, aluminum foil tape with liner, FSK aluminum foil tape, etc.
Types
Provide different types tapes to meet your requirements.
Aluminum Tape withount liner
Aluminum foil tape with liner
reinforced aluminum foil tape
Alu tape (without liner): It is the most common type of aluminum foil tape. It is mainly made of pure aluminum. The base material is smooth and bright, soft in texture and has high adhesion. It is often used for pipe sealing, stove waterproofing etc. It is also waterproof aluminum foil tape.
Foil scrim kraft facing tape also called FSK facing tape or FSK tape. has a combined backing of aluminum foil, kraft paper, and fiberglass scrim (lining). The combined backing properties result in a strong tape that provides a barrier against vapor. FSK tape is used for sealing and patching FSK ductwork and insulation and provides a finished look for exposed HVAC systems. It is also the type of foil tape for insulation.
Aluminum Foil Glass Cloth Tape Aluminum Foil Glass Cloth Tape(HAVC tape) consisits glass fiber cloth/fiberglass cloth composite aluminum foil coated with high performance acrylic adhesive/synthetic rubber and composite single-sided release paper. It is also the type of foil tape for insulation. Aluminum glass cloth tape is widely used as Dryer vent tape, Range hood tape, Vent sealing tape, Air ventilation tape, vent sealing HVAC tape.
Features
- High temperature resistance
- Good initial tack
- UV resistant
- Moisture resistant
- Heat resistant
- Anti-aging
- Fireproof
What Is it Used For?
- HVAC
- Industrial(pipes, sewers, etc.)
- Aerospace
- Household appliances(refrigerators, air conditioners, etc.)
- Marine
What Do We Have?
| Item No. | Total Thickness | Backing | Adhesive | Initial Tack | Peel Adhesion | Tensile Strength | Elongation at break | Temperature Resistance(℃) | Operation Temperature（℃） |
| FAT-30050 | 0.05MM | Liner | Solvent-based acrylic adhesive | 20cm | 18N/in | 38N/in | 5% | ‘-30~+120 | ’+10~+40 |
| FAT-30050W | 0.05MM | Without liner | Solvent-based acrylic adhesive | 20cm | 15N/in | 70N/in | 5% | ‘-30~+120 | ’+10~+40 |
| FAT-30120 | 0.12mm | 7u foil with 10*10 mesh 85gsm glass cloth | Solvent-based acrylic adhesive | 20cm | 15 N/in | 250N/in | 5% | ‘-30~+120 | ’+10~+40 |
| FAT-30801 | 0.18 | 18u foil with 8*8 mesh 95gsm glass cloth | Solvent-based acrylic adhesive | 20cm | 15 N/in | 250N/in | 5% | ‘-30~+120 | ’+10~+40 |
| Item No. | Backing Thickness | Adhesive | Initial Tack | Peel Adhesion | Tensile Strength | Elongation at break | Temperature Resistance(℃) | Operation Temperature（℃） |
| FAT-30808 | 45micron | Solvent-based acrylic adhesive | 20cm | 15 N/in | 70 N/in | 3% | ‘-20~+120 | ’+10~+40 |
| FAT-30150 | 125micron | Solvent-based acrylic adhesive | 20cm | 25 N/in | 120 N/in | 3% | ‘-30~+120 | ’+10~+40 |
How to use it?
- Surfaces to which tape is applied should be clean, dry, and free of grease, oil, moisture, dirt, and other contaminants.
- It may affect the property when the surface is not even or badly damaged. To make the surface even as much as possible.
- Sufficient pressure should be applied during the application. It will affect the properties and appearance if the pressure is not enough.
Related products
Double-sided foam tape
Acrylic foam tape
Filament Tape
Polyimide Tape
